Vandy Vape Pulse 80W AIO Kit 5ml

Vandy Vape Pulse 80W AIO Kit includes both a standard and DIY RBA pod. It features 80 watts with a single 21700/20700/18650 battery.
The chipboard allows a safe vape experience. The device warns you when the battery is low, it prevents open circuit, over-current, over-puff, short circuit, and high-temperature issues. 
PC and ABS nylon make Vandy Vape Pulse a lot lighter than any of the preceding devices such as the Pulse V2. 

The Pulse AIO includes both a pre-built pod and RBA pod that has 3.7 ml capacity. The setup works with any VVC coils the pod can hold 5ml e-liquid, and has a side-filling port.
The kit also works with any Boro-compatible tank. To ensure all Boro tanks have a tight fit, you may adjust the height of the positive table to the required height.
A closer inspection of the RBA tank also indicates that airflow is curved, making it suitable for both small and large coil builds. You may adjust the air intake by rotating the ring underneath the deck.

SPECS AND FEATURES:
Brand: Vandy Vape
Unit: 1 Set
Dimensions: 55.6 * 97.5 28.2mm
Power range: 5-80W
Operating Voltage: 3.2-4.2V
Maxim Output Current: 32A
Charging Input Voltage: 5 +/- 0.25V
Resistance: 0.05-3.0ohm
RBA Pod Capacity: 3.7ml
Charging Current: 1000mah
Boro compatible and tanks work in most boro style mods
Pre-built Pod Capacity: 5ml

IN THE PACKAGE:
1pc Pulse AIO Device
1pc Pulse AIO Pod
1pc Pulse AIO DIY Pod
2pcs VVC Coils
2pcs 24ga Ni80 Coil .4 Ohms
1pc Wrench
1pc Coil Lead Guide
1pc 18650 Battery Adapter
1pc USB Type-C Cable
1pc Accessory Bag
1pc Instruction Manua